[CAUT] reverse grip tuning pins

[Delwin D Fandrich]

|
| 100% agreement on not reaming. What are reverse grip pins?
|
| Thanks,
| Jim Busby BYU
|


  _____  


| They're cut thread pins, like Denro. Salesmen who were trying
| to make the other guy's pianos (using these pins) look bad
| would wrap a pin in a silk scarf and show how it would turn
| easily one direction and not in the reverse. The pitch was
| that these evil pins had *teeth* that would tear up the block
| in the competitor's product. The guys who's pianos had these
| pins used the same demo, illustrating how these pins resisted
| turning backward, and would therefore hold a tuning longer
| without "slipping".  Neither happened in actual pianos, of
| course, and the *teeth* were just an incidental artifact of
| the thread cutting. They weren't planned at all, but just
| came with the process.
|
| Is it even possible to buy pressed or rolled thread pins any
| more? The last I saw were from APSCO, I think, long ago.
| Guaranteed to snap and jump in pretty much any block, mic'd
| out of round, tapered, reverse tapered, and an interesting
| variety of diameters in every box. Wonderful things. I think
| maybe Kimball used pressed thread pins too.
|
| In any case, it's cut threads for me.
| Ron N

 

Ron is right about the advantages of cut vs. rolled pins. But not about the
marketing hype. At least as I remember it the claim was made by some that the
cut thread tuning pins helped make the pianos using them stay in tune longer by
not allowing the tuning pin to slip backward which, as we all know, causes the
piano to go out of tune. 

The first time I heard these claims was back while I still worked for Baldwin
(which, by then, was using Nippon Denro cut-thread pins). Some sales and
marketing people were touting the supposed advantages of the "one-way" feature
that was supposed to keep the piano from going out of tune by locking the pin to
the wood and thus not allowing the pin to turn in the counter-clockwise
direction. They were quite unhappy when I pointed out that if these claims were
actually true it really meant that the tuner was basically destroying the
pinblock each time the piano was tuned. He (or she) did, of course, end up
turning the tuning pin both directions during the process of tuning. As Ron
pointed out, none of this happened in the real world.

Marketing is such a wonderful thing.

Del

Delwin D Fandrich
Piano Design & Manufacturing Consultant
620 South Tower Avenue
Centralia, Washington 98531  USA
Phone  360.736-7563
<mailto:fandrich at pianobuilders.com> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20070816/1f7f0ae9/attachment-0001.html