[CAUT] driving tuning pins on a samick grand

[daniel carlton]

hi list

i'm driving tuning pins on a samick grand. i have the PB supported with
the PB support from Schaff, but the bottom lamination is separating from the
PB. i've included pictures. i've got the nuts on the PB support as tight as
they'll go, but the separation still happens. i've made my through half the
pins; i just wanted to see if anyone thinks if i should stop. by the way, i
pulled a small piece of the lamination off, so that's why there's a chunk
missing in one of the photos.

thanks

daniel carlton
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20070203/a00064dd/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pb 1.jpg
Type: image/jpeg
Size: 73401 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20070203/a00064dd/attachment-0003.jpg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pb 2.jpg
Type: image/jpeg
Size: 85312 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20070203/a00064dd/attachment-0004.jpg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pb 3.jpg
Type: image/jpeg
Size: 71444 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20070203/a00064dd/attachment-0005.jpg