Anyone know where these are available in the U.S.? Aaron At 04:27 PM 2/18/2007, you wrote: >I'd advise getting these new gas benches. Most solid adjustable >configuration I've seen todate. Never a chance in the world of >these developing squeeks and squacks. > >Not so expensive either if you order direct from piano suppliers. > >Cheers >RicB > > > We have a few non-Jansen artist benches (old) around and I'm > wondering if anyone knows anything who makes these things. The > mechanism is quite simple, one long threaded rod held by two fixtures > that always get loose. I've attempted repairs a couple of times but > without much success, or, I should say, long term success. One of the > benches has lost a piece of the mechanism. The department won't > spring for a new Jansen bench. Does anyone know if these are still > being made and/or if replacement parts are available? > > Thanks, > Aaron ------------------------------------------ Aaron Bousel abousel at comcast.net (413) 253-3544 (voice) (413) 253-3846 (voice & fax) -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070219/d4746996/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC