[CAUT] Fall board

[Porritt, David]

I have a "D" here with a fall board hinged front that I can't get to
stop buzzing.  I took it off and bent the hinge pins to make them very
tight and it still buzzed.  I finally broke down and ordered new hinges
from Steinway and it still buzzes.  If you move it out of its
hanging-straight-down position it stops but there's no guarantee that it
will stay there.  I've contemplated taking the thing off, but that will
leave 12 ugly holes where the hinge screws had been.  I've even
contemplated gluing it on straight out like the smaller pianos.  

 

Any suggestions??? 

 

dp

 

_________________________

David M. Porritt, RPT

Meadows School of the Arts

Southern Methodist University

Dallas, TX 75275

Phone 214 768-3976

dporritt at smu.edu

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20071015/d17c7934/attachment.html