I've generally had luck with a thick lube applied to the hinge pin and re-inserted. David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Porritt, David" To: "College and University Technicians" Received: 10/15/2007 8:32:49 AM Subject: [CAUT] Fall board I have a D here with a fall board hinged front that I cant get to stop buzzing. I took it off and bent the hinge pins to make them very tight and it still buzzed. I finally broke down and ordered new hinges from Steinway and it still buzzes. If you move it out of its hanging-straight-down position it stops but theres no guarantee that it will stay there. Ive contemplated taking the thing off, but that will leave 12 ugly holes where the hinge screws had been. Ive even contemplated gluing it on straight out like the smaller pianos. Any suggestions??? dp _________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 Phone 214 768-3976 dporritt at smu.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20071015/3ff282fa/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC