I see. The net change in leverage with a wippen rail move of a few millimeters may not be that significant to show up as an easily measurable change in the dip/blow specs. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Keith Roberts Sent: Thursday, October 25, 2007 8:20 AM To: College and University Technicians Subject: Re: [CAUT] Moving wippen rail I think the issue here is the discrepencies between the weight change and lack of change of dip and blow. There seems to be a denial that there is any change because the dip and blow ratio is the same. What will change is the aftertouch. Keith On 10/25/07, David Love <davidlovepianos at comcast.net> wrote: I guess the bottom line is your bottom line. If you shim the wippen rail out and the UW and DW drop then what does it really matter whether the explanation is vectors or leverage? -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20071025/48d09499/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC