[CAUT] new M & H plate screws?

[John Ross]

Try John Schadler, 866 842-4266, of APSCO, he apparently kept the screw part, when he sold to Schaff.
You might be wrong on the size 13, as I don't see it listed in the old APSCO catalogue
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano at win.eastlink.ca
  ----- Original Message ----- 
  From: Mark Cramer 
  To: CAUT 
  Sent: Tuesday, October 30, 2007 3:28 PM
  Subject: [CAUT] new M & H plate screws?


  The plate screws on a 1926 M & H I'm reassembling are starting to get a little tired. The pin-block screws are #13's and the rim screws are #16's, neither of which seem to be available through Pianotek or Schaff.

   

  Anyone have a lead on replacement screws of this size?

   

  Meanwhile, I've left a message for Mark Burgett asking if they can supply these. 

   

  Thanks,

  Mark Cramer,

  Brandon University

   

   

   

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20071030/5cf53e2e/attachment.html