[CAUT] new M & H plate screws?

[David M. Porritt]

Paul:

 

Heavy “in those days?” Check out a new CC94.

 

dp

 

____________________

David M. Porritt, RPT

dporritt at smu.edu

 

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams
Sent: Tuesday, October 30, 2007 5:50 PM
To: College and University Technicians
Subject: Re: [CAUT] new M & H plate screws?

 


Why was everything so oversized in those days for M and H.  Man, are they heavy!! 

Paul 




John Ross <jrpiano at win.eastlink.ca> 
Sent by: caut-bounces at ptg.org 

10/30/2007 03:30 PM 


Please respond to
College and University Technicians <caut at ptg.org>


To

College and University Technicians <caut at ptg.org> 


cc

	

Subject

Re: [CAUT] new M & H plate screws?

 

		




Try John Schadler, 866 842-4266, of APSCO, he apparently kept the screw part, when he sold to Schaff. 
You might be wrong on the size 13, as I don't see it listed in the old APSCO catalogue 
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano at win.eastlink.ca 
----- Original Message ----- 
From: Mark Cramer <mailto:cramer at brandonu.ca>  
To: CAUT <mailto:caut at ptg.org>  
Sent: Tuesday, October 30, 2007 3:28 PM 
Subject: [CAUT] new M & H plate screws? 

The plate screws on a 1926 M & H I’m reassembling are starting to get a little tired. The pin-block screws are #13’s and the rim screws are #16’s, neither of which seem to be available through Pianotek or Schaff. 
  
Anyone have a lead on replacement screws of this size? 
  
Meanwhile, I’ve left a message for Mark Burgett asking if they can supply these. 
  
Thanks, 
Mark Cramer, 
Brandon University 
  
  
  
  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20071030/47492c78/attachment-0001.html