[CAUT] Ronsen-Wurzen hammers

Mitch Staples staples.13 at osu.edu
Wed Apr 16 13:06:11 MDT 2008


Eric,

When you needle these hammers do you deep needle at the strike point, on the
shoulders, or just sugarcoat them, (or some combination)?  I'm wondering if
you treat all lacquered hammers like Steinway hammers.

Mitch Staples
Ohio State University

-----Original Message-----
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org]On Behalf Of
Wolfley, Eric (wolfleel)
Sent: Wednesday, April 16, 2008 1:36 PM
To: College and University Technicians
Subject: Re: [CAUT] Ronsen-Wurzen hammers


I've put a number of sets of Ronsen Wurtzen hammers on and I like them
for our practice rooms but I've had an experience similar to Alan's.
Without lacquer they seem to be missing something at all volumes, even
for a practice room. At the minimum I'll soak them from the mid-tenor on
up and often soak the whole set. You have to needle them back down after
doing this of course but they then have a good strong core for a wider
dynamic range. They sound nice after doing this plus I've found that if
hammers are voiced too soft the kids just pound harder to get tone out
of the piano. From my experience I can't imagine using these hammers
"straight out of the box". That being said, I still like them a lot
though I wouldn't put them on a performance piano.

Eric

Eric Wolfley, RPT
Director of Piano Services
College-Conservatory of Music
University of Cincinnati



More information about the caut mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC