Yes it does work for swelling loose bushings I learned about Profelt at the Steinway seminar in Oberlin last summer. Ken Sloan gave me the hint. A #7 bridge pin works well as a caul on the damper guide rail. Have fun! Paul "Dennis Johnson" <johnsond at stolaf.edu> Sent by: caut-bounces at ptg.org 12/16/2008 01:44 PM Please respond to caut at ptg.org To "College and University Technicians" <caut at ptg.org> cc Subject [CAUT] Vs Profelt... again Hi all- I finally got to the archives for catching up with this previous discussion, which left me a bit confused. My original understanding from Pianotek is that this stuff is intended for use as a loosening agent together with cauls for over tight centers or bushings. Does it also work as well for swelling up loose bushings, or was that a misunderstanding? I would like to try it on a set of loose damper guide rail bushings for an S&S B if that is recommended. many thanks, Dennis Johnson St. Olaf College -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20081216/ce658f69/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC