Dennis- You could do an interesting test for us here: Do some bushings with VSProfelt, and some with alcohol and water, and tell us if there is a difference in the result. Ed S. ----- Original Message ----- From: Dennis Johnson To: College and University Technicians Sent: Tuesday, December 16, 2008 2:43 PM Subject: [CAUT] Vs Profelt... again Hi all- I finally got to the archives for catching up with this previous discussion, which left me a bit confused. My original understanding from Pianotek is that this stuff is intended for use as a loosening agent together with cauls for over tight centers or bushings. Does it also work as well for swelling up loose bushings, or was that a misunderstanding? I would like to try it on a set of loose damper guide rail bushings for an S&S B if that is recommended. many thanks, Dennis Johnson St. Olaf College -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20081216/d03b6fa9/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC