To be fair to SAMA, they shim the board if asked (at a price) and don't touch it if asked not to. They will also refinish the plate or just clean it up. The customer decides what gets done. Regards, Fred Sturm University of New Mexico fssturm at unm.edu On Dec 17, 2008, at 11:09 PM, Bob Hull wrote: > The most recent work I saw from SAMA in someone else's shop looked > okay as far the restringing but the soundboard cracks had not been > repaired and the plate finish was poor. > > Bob Hull -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20081218/dd4082c8/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC