When spacing (i. e., bending) the portion of the key between the balance pin and the distal end (where the lifter felt is) is indicated, does anyone have a technique that works particularly well for them? We are experimenting with heat alone (which we have found to be extremely slow-going, so far) and with steam (more rapid results, but harder to contain than heat without all that moisture in it). Thoughts? Alan Eder -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090820/2e72a740/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC