I think it the spec was 2 5/8, give or take 1/16. I worked there and made the gauges, but that was 10 years ago. On Sat, Jul 4, 2009 at 2:56 PM, Bob Hull <hullfam5 at yahoo.com> wrote: > > Rebuilding the action of an SD 10 and it appears that someone has already > been monkeying with this one. The balance rail pins are almost buried in > the mortise. The key ht. on the old action is 2 3/4" to the underside of > the keytop. Does someone know what the original specs were? The piano > action handbook says 2 9/16" for Baldwin concert grand but I didn't know if > the SD10 would be different than a generic older Baldwin concert grand. > > Also, original specs for hammer blow and dip if you know. I'll make my > adjustments from there. > > > Thanks. > > Bob > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090705/0c55f3cc/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC