No, the travelling was also great. It's a back and forth issue with the line...ie. a straight line of the flanges on the rail are not even close from top to bottom! PW From: "David Ilvedson" <ilvey at sbcglobal.net> To: caut at ptg.org Date: 07/31/2009 01:26 PM Subject: Re: [CAUT] Friday Puzzler Traveling issues? Askew as in not centered under the hammer shank/knuckle? David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Paul T Williams" <pwilliams4 at unlnotes.unl.edu> To: caut at ptg.org Received: 7/31/2009 10:25:25 AM Subject: [CAUT] Friday Puzzler >Hi gang! >I'm puzzled! I'm now working on a 1966 Steinway M with a strange thing >going on. I looked and the wippens and they're all askew and not in any >kind of even line on the brass rail. Some places, they're nearly 2mm off. >I tried to attach a picture, but it was too big. I'm still getting used to >my new camera and iMac (having been a life-time PC guy). >I checked the wips themselves, and they're all good. I can't "see" >anything off on the brass rail, but only took off 3 wips in a row to check >the rail out. >Have any of you ever come across this? I've got a message out to our tech >support guy about the picture, but perhaps you know what I'm describing. >Thanks for any help. >Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090731/54b70efc/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC