Todd, Did you clean the springs themselves? Try that as well. Paul Todd Loomis <teloomis at hotmail.com> Sent by: caut-bounces at ptg.org 05/04/2009 10:56 PM Please respond to caut at ptg.org To Caut <caut at ptg.org> cc Subject [CAUT] sohmer damper spring noise Has anyone encountered a Sohmer 455K vertical where the damper springs ride in unfelted grooves? I just worked on one and the springs were creaking audibly in the grooves when the pedal was depressed. I tried graphite pencil, but this seemed to wear off after several cycles of the damper lever. On closer examination, the springs had dug right through the graphite paint, ultimately riding on tiny spots of raw wood. My first thought was to apply the usual felt pads, but how to make it stick reliably to the Dag? Todd Loomis check out the rest of the Windows Live™. More than mail–Windows Live™ goes way beyond your inbox. More than messages -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090505/91bcae32/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC