>What timing. I started one of those jobs today. It's the first time >I've had trouble with the old screw holes lining up, so I've got to >do some redrilling, and didn't get finished today like I'd >hoped. Would have been nice if they could have drilled the holes in >the bottom of the brackets to line up like the old brackets. This >particular set had three holes that didn't line up. One front end >bracket hole, and both the front middle holes - the ones that go in >at an angle. The angle is drilled differently in the new bracket >and completely misses the old screw hole in the action frame. This >is the set with smaller brackets for the insides. Yeah, I had that last month -- redrilled the two inner front holes. I also had to get longer action screws, because some of the feet were thicker than the originals. I wondered if the potmetal brackets had come in several versions? Susan Kline -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090515/4e11b139/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC