[CAUT] When to restring...OT 1098's

[Paul T Williams]

Pics, please, please please!!   I hate these things!

Paul!





From:
Jim Busby <jim_busby at byu.edu>
To:
"caut at ptg.org" <caut at ptg.org>
Date:
08/03/2010 04:24 PM
Subject:
Re: [CAUT] When to restring...OT 1098's



A few months back Jon and Ron suggested this and I have done it on about 5 
pianos. VEEERRRYY GOOD! Rendering is so much better.  It is standard 
procedure now. Thanks Jon and Ron!
 
Jim Busby
 
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon 
Page
Sent: Tuesday, August 03, 2010 3:21 PM
To: caut at ptg.org
Subject: Re: [CAUT] When to restring...OT 1098's
 
The nasty mid-section strip on the card-board type stuff,
though is a pain to replace!  Any hints on that?
 
Replace it with a brass half-round. Place felt fore and aft of it;
thick enough to dampen but not press into it causing drag.
-- 

Regards,

Jon Page

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100803/9c057af1/attachment.htm>