[CAUT] When to restring...OT 1098's

[Jim Busby]

Paul,

The same pics Jon just sent, but Ron posted some a while back too. I'll search for them.

Jim

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams
Sent: Tuesday, August 03, 2010 3:29 PM
To: caut at ptg.org
Subject: Re: [CAUT] When to restring...OT 1098's

Pics, please, please please!!   I hate these things!

Paul!



From:

Jim Busby <jim_busby at byu.edu>

To:

"caut at ptg.org" <caut at ptg.org>

Date:

08/03/2010 04:24 PM

Subject:

Re: [CAUT] When to restring...OT 1098's


________________________________



A few months back Jon and Ron suggested this and I have done it on about 5 pianos. VEEERRRYY GOOD! Rendering is so much better.  It is standard procedure now. Thanks Jon and Ron!

Jim Busby

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page
Sent: Tuesday, August 03, 2010 3:21 PM
To: caut at ptg.org
Subject: Re: [CAUT] When to restring...OT 1098's

The nasty mid-section strip on the card-board type stuff,
though is a pain to replace!  Any hints on that?

Replace it with a brass half-round. Place felt fore and aft of it;
thick enough to dampen but not press into it causing drag.
--

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100803/d5a12bd3/attachment-0001.htm>