I greatly favor the repair Ron showed us, over this. I don't think that making an inlay on both sides would be too hard. One could also inlay 1/4" brass instead of maple, held in by short flathead screws, with the edges filed to bevels, but I would use wood instead, unless the piano gets beat up a lot. Susan Kline >Apparently, only one side of the wedge is necessary. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100810/56808ae3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC