Jon, After installation of the new pedal cushions, the pedals ended up pretty much level I¹d say, which I liked. Being a pianist myself, I judged the feel with the lyre on the piano, and don¹t believe I¹d want them much higher or lower. You refer to the cushion rest ³package.² Do you mean something more than the stuffed leather cushions that are tacked to the bottom board? Is it typical to adjust their thickness in some way? I have on occasion seen felt on top of the cushion to adjust the rest position, but obviously in this case I don¹t want the rear of the pedal to be any higher than it is now. I suppose it would be possible to squash them in a vise to thin them, but that doesn¹t seem like it would be desirable, as it might introduce more noise? Just curious as to best practices in this area. Paul -- Paul Milesi, RPT Staff Piano Technician Howard University Department of Music Washington, DC From: Jon Page <jonpage at comcast.net> Reply-To: <caut at ptg.org> Date: Sun, 15 Aug 2010 16:03:14 -0400 To: <caut at ptg.org> Subject: Re: [CAUT] Steinway Pedal Lyre Regulation After Reconditioning > is that the new pedal cushions ("ravioli") are > thicker than the originals. In deciding on the thickness of the rest 'package', consider the inclination of the pedals at rest. Probably set them level to start, knowing the felt will compress and the pedal will rise in the front. But I still start with the front slightly higher than level to allow the pedal to traverse through level but not so much that once the compression happens, the pedal is too high. In other words, use your best guess... Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100815/007d9f0b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC