On Jan 14, 2011, at 1:50 PM, Paul T Williams wrote: > I'm learning this a bit too late, but good advice. Soak the darn > things on first lacquering. I thought they were supposed to do this > in the factory. Not enough, I guess. Try applying lacquer to the sides of the hammers, by the core. Action on end. Swing each hammer out, apply at the tip of the core. Regards, Fred Sturm fssturm at unm.edu “Art is not a mirror held up to reality, but a hammer with which to shape it.” Brecht -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20110114/e16c48db/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC