http://www.mypianotech.com/thumper.html Doesn't have many dimensions, though the 2-inch hint may be sufficient. Jim On Fri, Jan 14, 2011 at 3:33 PM, Norman Cantrell < normancantrell at sbcglobal.net> wrote: > John > > Two years ago ETSC adopted a standard Tuning Test Blow jig for exam > purposes that is available by following the link on the PTG website in the > exams section. (see Test Blow Device/Thumper) If you are wanting a jig to > help with training or to check stability I'll see if I still have the specs > for the old jig and will try to send them to you off list. > > Regards > > Norman Cantrell, SCRVP, ETSC Board Liaison > > --- On *Fri, 1/14/11, John Minor <jminor at illinois.edu>* wrote: > > > From: John Minor <jminor at illinois.edu> > Subject: [CAUT] tuning test blow jig? > To: caut at ptg.org > Date: Friday, January 14, 2011, 2:24 PM > > > Does anyone know where I can get the specs to make a tuning test blow jig? > > Thanks! > > John Minor > University of Illinois > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20110114/b4cf55a5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC