I just put a set of Ronsen Weickert felt on a Yamaha C3 which yielded excellent results. Have used their Wurzen AA also. Nicely shaped hammers and consistent predictable voicing. Henry Nicolaides, SIU Carbondale > From: andrew at andersonmusic.com > Date: Thu, 1 Mar 2012 16:46:35 -0600 > To: caut at ptg.org > Subject: [CAUT] Kawai KG-2C hammer shank-flange options > > The subject is in the studio of a piano professor and has had its hammers reshaped a few times, and its knucles are the flattest I've ever seen. > > I called Kawai in the hopes they would sell a pre-hung set. No dice. Are original hammers and parts desireable here are is there a hammer you prefer for the job? In this case the piano is in a high ceiling studio with hard walls and floors and I was called in because it was too bright. More than 1/2" of flat on top the hammers definately didn't help... > > What hammers would you suggest sampling for the customer? > > > Andrew Anderson, > Artisan Piano -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/caut.php/attachments/20120302/840f25e2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC