Hi Dean: I meant the defaults you set for the conservative style not the default of Moderate. > >>I always try the conservative tuning setting (your defaults) for octave size >I have a lot of users that like that style, but actually the "Moderate" style is >the default I send TM out with. > >>Planning on replacement this June. Currently 486 dx33 with pcmcia slot type 3. >Considering >WINBOOK 75 Pentium and others of similar class. > >I recommend a large hard drive, a color screen, and the smallest unit you can >find. You may want to consider one of the new Macintosh PowerPC laptops. They >run DOS, Windows, AND Macintosh, including TM/Mac and Chameleon 2. The 2300 and >5300 series run Windows as fast as your 486/33. We have a special cross-grade >price for moving from TM/DOS to Mac, its $250, and you keep TM/DOS. > >>What difference is the choice of Metric or American wire sizes--is there a >"look-up" table >in the program? > >Yes, the difference is about 1/1000 inch in the smaller guages, but the Does this mean I would be better off measure in English (inches)? > >PS On all 3 of your messages, the line length is too long for my MacCIM program I am set at 72--what would be better? I'll try 70 with this message. Regards, Don
This PTG archive page provided courtesy of Moy Piano Service, LLC