RE Noisy Artist Benches

[Kenneth Sloane]

                      Subject:                              Time:  5:25 PM
  OFFICE MEMO         RE Noisy Artist Benches               Date:  2/2/95

ORIGINAL POSTING:

Date: 2/1/95 12:35 PM
To: Kenneth Sloane
From: pianotech@byu.edu
Ive had similar problems with my benches here as well.  First, make sure
all the screws and bolts are tight.  The trick is to also check the side
hand rollers.  Check to see if they have a hex nut.  If there is one,
loosen it up and then push the handle in all the way and tighten.  This
should take care of the play.

Good luck
Paul
kupelian@oswego.edu


REPLY:

If there is still play when pushing in the handles all the way, add a washer.
Ken Sloane, Oberlin