On Fri, 7 Jul 1995 PianoGuru@aol.com wrote: > Hi Michael > > Baldwin has a technical bulletin describing such a repair. There are over > sized agraffes which would allow you to tap the hole to a larger size and > install the oversized agraffe. Only the threaded portion is oversized. > Another option is to drill and tap the hole from the bottom, but not all the > way through. Then install a special bolt with a hole drilled through its > length. When the bolt bottoms out in the hole it is broken off flush. The > threads for the original agraffe are then tapped in the pre-drilled hole in > the bolt. This repair is used by Baldwin and O. S. Kelly, and is described > in more detail in the technical bulletin available from Baldwin Technical > Support at 501-483-6116. > > Good Luck, > Frank Emerson > Baldwin R & D Frank, Any chance that some of those technical bulletins could be made available here? David M. Porritt, RPT SMU - Dallas
This PTG archive page provided courtesy of Moy Piano Service, LLC