Dampp-Chaser installing problem

Kam544@aol.com Kam544@aol.com
Mon, 02 Oct 1995 00:18:55 -0400


Gordon Large posted:
>>...was unable to hang the humidifier tank from the braces.  There
are only two beams on this instrument, and they are spaced too far apart at
the front end for the hanger rods that come with the system...Anyone here had
this situation?<<

Gordon,

Have not specifically experienced your situation.  However, Dampp-Chaser
Company (1-800-438-1524) does have some Individual Components, part #48-A,
which by their description is a "pair of telescoping support tubes with
hanging brackets to facilitate installation of regular system in grands
without beams".  This may satisfy your need.  Good luck.

Keith A. McGavern, RPT
Oklahoma Chapter 731





This PTG archive page provided courtesy of Moy Piano Service, LLC