Dampp-Chaser installing problem

[Gilreath@aol.com]

Gordon,

As well as using the support tubes from Dampp-Chaser that Caleb mentioned,
you can go to the local hardware store and purchase drill rod of the same
diameter as the rod that comes with the system.  Simply procure a piece long
enough to span between the braces and install as normal.  If the rod tends to
flex over the longer length, you may have to go to a larger diameter rod and
come up with some new hangers.

Hope this helps,

Allan Gilreath
Gilreath Piano & Organ Co.
Berry College
Gilreath@aol.com