Dampers

[Vince Mrykalo]

> I have been trying to mute out the last lingering harmonics of
> an upright on the first of the trichords at the copper/steel break.  I've
> tried an oversized trichord damper, as well as various combinations of block
> and trichords.  I've tried moving the damper up and down all over the
> place, but to no avail.
> Laurence Beach
> Vancovuer, B.C.

Consider fabricating an overdamper using damper wire.

---
vince mrykalo  rpt

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you are not enjoying your work, you are not charging enough.
-Vic Benvenuto
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^