At 09:40 AM 10/5/95 -0600, you wrote: > > Does anyone out there have experience with plugging and reboring hammers? >I have a complete action that was rebuilt and later we decided to have a >complete new one made, keyframe, keys, stack, everything. Since the new >hammers were not reused, I would like to pull them and use them on a piano >here at the school. The hammers have no noticeable wear on them and it >would help me if I could reuse them. > What I particularly want to know is the best kind of wood to use as a >plug and the best glue, considering that they are going to be rebored. Also, >any other pertinent information about this subject. > Thanks for any help. > >Avery Todd >University of Houston >atodd@uh.edu > > Avery, Give Ron Sanford a ring, he is in our chapter. I think the guy is one of the best. Buy the way, the Engineering building that I hang out in is only a few hundred yards away from the Music building, Lets get together for lunch sometime. Dan Squire
This PTG archive page provided courtesy of Moy Piano Service, LLC