On Thu, 15 Aug 1996, Charles Ball wrote: > > Dear Ron, > > Unless you move the plate, the strike point should not change when you > restring. Do take into consideration that the new hammers will probably > have a longer strike distance (from the middle of the shank to the tip of > the crown), since the old hammers are presumably worn down a bit. Thus, if > the new hammers are glued up at the same point, and with the same angle, the > strike point will move back a bit from the capo. > > Charles > > > > Charles Ball > School of Music > University of Texas at Austin > True. But, all things being equal, those new hammers are only moving BACK to where the old hammers were originally striking before they became worn, right? Les Smith lessmith@buffnet.net
This PTG archive page provided courtesy of Moy Piano Service, LLC