Jp> tension against the hammer butts? Jp> I haven't read or heard to much on this subject regarding hammer Jp> return spring replacement. Any suggestions would be appreciated. Jp> John Piesik John, Reach in with the palm of your hand facing the strings and push each spring back toward the strings right at the base where the coil starts. This should weaken them. If you get a cramp you can use the same tool you use to adjust butterfly (Steinway repetition springs). I use a grand damper wire in a small tool handle with a groove filed in the bottom to hold the spring. _ Scott Johnson Auburn, California scott.e.johnson@24stex.com ___ Blue Wave/DOS v2.21 [NR]
This PTG archive page provided courtesy of Moy Piano Service, LLC