> > I've noticed that the LED's on my Accu-Tuner are reluctant to > "light up" on a certain note. I'm not talking about the > rotational pattern; rather, the lights don't come on at all. > Except for the note/octave LCD display, you'd think the machine > had been turned off! > > I'm now beginning to think it's the same note, B5, and that it > happens regardless of what tuning page I'm on, and regardless of > the piano being tuned. I have noticed this also and it is mainly B5. I think the reason it is hard to get a reading is that it is reading a higher partial than the C6 next to it. I think that the upper partials begin to get weak in the treble and makes it hard to get a reading. By moving the SAT I can usually get a better reading for that note. It is sometimes the A and A#5 as well. Ron ---------- Ron Berry, RPT, Indianapolis, IN ronberry@iquest.net check out the Piano Page at: http://www.prairienet.org/arts/ptg/homepage.html for great information about Pianos
This PTG archive page provided courtesy of Moy Piano Service, LLC