Mitch Kiel wrote: > Years ago, to achieve any stability at all on new Daewoo > pianos, another Korean maker who previously supplied pianos to the store, we had > to install maple shims between the pinblock and plate flange because the plate > fit was so poor. In the '80's, Samicks had a double flange. I don't know whether they still do or not. These pianos never had a good pinblock fit at the front flange, but because of plate bushings, that didn't matter, as long as the fit was good along the back flange. vince mrykalo rpt provo utah ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use your head. It's the little things that count. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC