Les Smith posted: >Interesting. Although I've never actually done it, I have considered dril- >ling a small hole too. Many times in an older piano the plate bushings are >worn enough so that the first treatment soaks in pretty good, but the same >solution that swells the pinblock also swells the plate bushings, making the >next treatment more difficult. Would I be correct in assuming that you dril- >led your hole through the plate bushing on the side opposite the pull of the >string? Wherever I could gain access with the largest bit allowable, Les. Keith A. McGavern, RPT Oklahoma Chapter 731 Oklahoma Baptist University Shawnee, Oklahoma
This PTG archive page provided courtesy of Moy Piano Service, LLC