Tom Cobble wrote: > Essentially the problems come in two catagories > > #1 YC action centers with little or no movement. > Will Protec work,,, ?? or will I have to repin???. > #2. This is where it gets tricky... The escapement feels like yor're > falling off a short but very steep and sharp cliff.. It has been my experience that Protek will only be temporary in this situation. Actually, I like to do both: repin using protek on the bushings. As for the escapement, it is my belief that them thar knuckles are too big. Replacement is the thing to do. Use the Renner small ones. vince mrykalo rpt byu provo utah ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get a full day's worth of Dave Stanwood at the Intermountain convention May 10th and 11th at Brigham Young University. Call 801-378 3400 for more information. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC