On Fri, 8 Nov 1996, Paul Kupelian wrote: > This procedure is best done if you have an action cradle and you can tip > the hammers so that the bottoms of the hammer shanks are face up and away > from the wippens. Two questions: 1. If hide glue was used to affix the knuckles, would steam do any good if you directed a stream at the knuckle? 2. Wouldn't you risk damaging the centerpins if you were yanking knuckles attached to the rail? Ron Torrella, RPT Assistant Piano Technician University of Michigan School of Music
This PTG archive page provided courtesy of Moy Piano Service, LLC