David, Check to see if the damper wire is pressing too tightly against one side of the bushing or the other. Perhaps when you were tightening the screws the flange shifted slightly, upseting the alignment? >Dear Friends, > >I recently tuned a nice Baldwin Artist grand, about a year old. I also >tightened all of the plate and action screws, including the damper flange >screws. During my tuning, I noticed that two dampers were sluggish in >returning, so I worked to get them to stop sticking, and they were working >when I left. >Thanks! >David > > >David A. Vanderhoofven Associate Member, PTG >Joplin, Missouri, USA e-mail: dkvander@clandjop.com > Paul E. Dempsey Piano Tuner/Technician Marshall University Huntington, WV dempsey@ramlink.net
This PTG archive page provided courtesy of Moy Piano Service, LLC