---------- > From: Marcel Carey <mcpiano@multi-medias.ca> > To: pianotech@byu.edu > Subject: Re: Wurlitzer hexagonal soundboard > Date: Tuesday, April 29, 1997 10:07 PM > > At 16:52 97-04-29 -0500, you wrote: > > > > >However, I am still stuck with this three-layered solid spruce soundboard > >concept that has the grain running in three different directions, then > >glued together. Is there anyone other than myself who has heard of this > >concept as well? Or is this the lamination type soundboard concept? > > > >Sincerely, > > > >Keith A. McGavern > > >Dear Keith, > >The 3 plies in the soundboard are just the standard laminated veneers. The > >claim was that the vibration would travel in all directions equally well. > >Just a claim mostly to overlook the fact that the board will not vibrate as > >easily because it is much more rigid with 3 ply construction. > >James Grebe from St. Louis > > Also not to forget that wood shrinks and swells only across the grain. So if > you have grain going across the others for the middle ply, you have much > much more dimension change with humidity variations. That, for me, explains > a lot why these little buggers will move so much with humidity changes. > > Marcel Carey, RPT Dear Marcel, And to think they used to say because of the boards' rigidity it would not swell so much due to humidity changes James Grbe >
This PTG archive page provided courtesy of Moy Piano Service, LLC