In a message dated 12/11/97 7:07:11 AM, you wrote: <<"(what's that old movie where the guy keeps talking about a new machine that goes..."..pocketa, pocketa, pocketa, pocketa...")">> The Secret Life of Walter Mitty ? Brad if you only had an hour I would suggest going out for doughnuts and coffee :-) Otherwise there is no "secret" to Korean product prep. Basics first---get everything moving properly and making noise where appropiate or not making noise where appropiate. Other than noise making I generally follow the scenario 1. keydip 2. Jack to knuckle location 3. Spring tension, reps 4. Hammer line I find that attention to these 4 areas will cure 'most' of the original details needing attention. My experience in prepping Korean pianos is limited to Samick and this might not be true on other brands. As for the rest of the ingenious problems that they can find to endow a piano with, just take them as they appear. I wouldn't know how to set a time limit for this but an hour for the first four steps should be sufficient (?). Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC