Everett vertical pinblock separation further and further

[pianoman]

I guess my attempt at humor has failed.  Sorry.
James Grebe
R.P.T. from St. Louis
pianoman@inlink.com
"I am only as good as my last tuning"

----------
> From: Keith McGavern <kam544@ionet.net>
> To: pianotech@ptg.org
> Subject: Re: Everett vertical pinblock separation further
> Date: Saturday, December 13, 1997 7:02 PM
> 
> >What happens if you put in the epoxy and clamp the thing back together
and
> >it doesn't budge.  You have just locked this separation there forever.
> >James Grebe
> 
> The recommendation by Roger Jolly as I read it was:
> 
> "...drop the tension and see if the bolts will
> >pull the back assy. in place. If so, loosen the bolts,
> >use 24Hr Epoxy and heat with hair drier,
> >you will find the epoxy will run like water...
> 
> Did you understand something different, James?
> 
> Keith A. McGavern
> kam544@ionet.net
> Registered Piano Technician
> Oklahoma Chapter 731
> Piano Technicians Guild
> USA
> 
>