Everett vertical pinblock separation

[Maxpiano]

In a message dated 97-12-13 01:17:44 EST, you write:

<< I think that you ought to
 put this on the list of things to do in the future.  Easy fix....run glue
into
 crack and tighten bolts, use clamps to help the bolts until glue has set,
etc. >>

Jim - In your experience, it is possible to pull the crack together without
letting the tension down?  I have never tried it without  backing off the
tension and then haveing to go through several times over the whole piano
(pitch raising, tuning) to get it back.

Bill Maxim