Subj: Reajusting pitch question

[Don Rose]

Hi Phil et al,

At 07:22 PM 2/2/97 -0500, you wrote:
>Dear Ed,
>
>How can one "plug their offset in BEFORE you put an FAC tuning into
>memory" when one does not know the size of the offset until one has
>calculated the FAC tuning?  Must you calculate the FAC twice?

>Phil

1. do an fac
2. tune a4
3. check to see if "offset" is necessary.
4. turn SAt off
5. turn sat on
6. adjust offset up or down using cents cents.
7. Tune A4
8. check A4 and if necessary cyle through step 6 & 7 until "correct" offset
has been found.
9. set "correct" offset.
10. do fac
11. Store fact
12. tune piano pitch correcting as necessary.

Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
"Tuner for the Centre of the Arts"
drose@dlcwest.com
3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner