On Sat, 15 Feb 1997, Horace Greeley wrote: > In agreeing with Ron, below, also check the radius of the slot in the > underside of the balancier itself. Springs can cut into that area, making > for unbalanced travel, just as strings cut into agraffes... Ron Torrella wrote: > >While you're staring at wippens, have a look at the area where the rep > >spring contacts the rep lever -- if there's a groove on the sides of the > >slot, that could be part of the source of your problem. To feel-test for Isn't this what I was saying? Ron Torrella, RPT Assistant Piano Technician University of Michigan School of Music
This PTG archive page provided courtesy of Moy Piano Service, LLC