I would be very interested in hearing from anyone who has used CA glue to render an otherwise untunable piano usable again. I have several private customers with well-used blocks in their pianos, for whom rebuilding is not really an option. Does this work on a previously doped block? Are those old uprights really salvageable after all? Is there any advantage to removing the tuning pins or should they be left in place? I remember there was a thread about this awhile back, but don't remember if this was conjecture or fact. What affect does the climate have on a block with CA as a filler? Does anyone have any idea about the longevity of this repair? As a for instance, I have a client with an open face block in a 1920's Bosendorfer. She is quite elderly, but plays the piano every day. She simply refuses to be without the piano while it is being rebuilt. The piano actually sounds very good except in the low bass (dead) and the high treble (no hammerfelt). Could I twist the bass strings, replace the action and then use this technique to help the tuning pins hold? If it lasted several years it would be worth it to her, because she may not last that long, and she would still have "her" piano in usable condition. David Graham dgraham@niu.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC