> Date: Wed, 26 Feb 1997 22:23:01 -0600 > From: David Graham <U40DCG1@WPO.CSO.NIU.EDU> > Subject: Re: baldwin phone # -Reply > To: pianotech@byu.edu > Reply-to: pianotech@byu.edu Nothing against Baldwin or Renner, but I would recommend Renner shanks and flanges with Issac Hammers. I love those hammers, especially on American pianos. ilvey, RPT (David Ilvedson) Pacifica, CA > Nothing against Baldwin, but I would recommend using Renner parts with > Premium Blue Hammers. I have begun replacing actions in Baldwin Ls > from the 1930s to 1950s vintage and have found them to be excellent. > Contact Lloyd Meyer and tell him you want the hammers prehung by > Peter Bourassa (sp?). He did a set for me once when I was in a time > bind and I found it to be a very good job.Renner USA's phone # > is:203-221-7500. Don't expect to talk to a person when you call, but they > call back promptly. > One thing to check carefully on the Baldwin Ls: check for cracked action > rails. I have found one, and several with very loose screws. I replaced > the cracked one with a new rail from Baldwin, and it worked out very > well,cheap too,about $25.00. A few mounting holes had been moved, but > no real problem to get it in place. > Also check the action spread. On two of them I moved the wippen rail > almost 1/8th of an inch! > David Graham,RPT > dgraham@niu.edu > >
This PTG archive page provided courtesy of Moy Piano Service, LLC