floating plate threads

[Richard Moody]

Which Baldwin should be eager to tell us about. esp in the actual
measured settings. 
	Which in their very excellent service manual  settings are given,
but I don't remember specs for front bearing vs rear (back) bearings.
 
Richard Moody    
----------
> From: JIMRPT@aol.com
> To: pianotech@ptg.org
> Subject: Re: floating plate threads 
> Date: Wednesday, June 04, 1997 6:41 PM
> 
> 3. Back bearing has more to do with front bearing than you
currently think it
> does.
> Jim Bryant (FL)
> 
>