Jon, Oops. Thanks. I knew I would forget *something*. :-) Avery >Also, with that key height, make sure the keys are at least 1/4" >onto the front rail pins. Anything less than that will cause excess wear. >Jon Page >Harwich Port, Cape Cod, Mass. (jpage@capecod.net) >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >At 11:53 AM 5/22/97 -0500, you wrote: >> If the 2-3/4" height fits the surrounding case parts and the necessary >>key dip, I'd regulate out a few sample notes and make sure everything >>will work. If so, go with that. >> Just my opinion. >>Avery > >Jon Page >Harwich Port, Cape Cod, Mass. (jpage@capecod.net) >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _____________________________________ Avery Todd Moores School of Music University of Houston Houston, TX 77204-4893 atodd@uh.edu _____________________________________ Help stop Internet spam! Join CAUCE: <http://www.cauce.org/ (The Coalition Against Unsolicited Commercial Email)
This PTG archive page provided courtesy of Moy Piano Service, LLC