This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello list There are few time that I send to the list a question about the use of = impact tuning hammer. I was surprised with the answers and bought an = impact tuning hammer from APSCO. I received it this week and today I = went to tune an upright that was out of tune and by the first time I = used it. I don't know if I used it in a wrong mode or if it's broken = because the only difference I feel was that it have a moving side to = side before the tuning pin start moving. I was waiting for some impact = to turn the tuning pin. I did the same effort as is was using a common = tuning hammer. I would like to receive some explanation about this. Rogerio Cunha - IC Member of the Guild - Rio -Brasil ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1d/c5/f7/33/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC